news

Do you know all the seven common sense of LED display?

380 views admin 2021-05-24

With the continuous development of economy and society, the application of LED display screen is more and more extensive. Whether you walk in streets, or in busy urban squares and high-end entertainment places, you can see the figure of LED display screen. Today, LED display is widely used. Do you know the seven common sense of LED display? Let's learn how to use LED display correctly with you.

How to use LED display screen:

1. Check the circuit and switch of LED display screen, keep the switch dry to avoid leakage and electric shock.

2. Air conditioning can be used to dehumidify the LED display screen, place desiccant and physical moisture absorption method to keep it dry and prevent the display screen from moisture.

3. In Meiyu season, the LED screen is guaranteed to be used at least once a week for at least 2 hours each time.

4. Proper ventilation of LED display can make the water vapor attached to the display evaporate quickly and reduce the humidity of indoor environment. But need to pay attention to is: avoid in some windless and humid weather ventilation, this will increase indoor humidity.

5. The use environment of outdoor LED display is complex, so it is inevitable that there will be water seepage in the box. In addition to the above measures, it is necessary to regularly check whether the waterproof rubber ring of the box is aging, deformed and incomplete; Whether the screw or lock of sealing box is easy to loosen and the pressure is not enough.

6. Rent the indoor LED display screen for outdoor use. In rainy days, you must cut off the power immediately. If you don't need to remove the screen, you can quickly cover it with the rainproof cloth prepared in advance, and take out the box to dry in sunny days. In case of continuous rain, open the back cover of the box and use the fan to turn on the cold air for drying. And then air in a ventilated and dry room for more than 8 hours. Turn down the brightness of the display screen and ensure that the screen is lit for more than 4 hours to fully emit the moisture in the electronic components.

7. If the LED display is not used for a long time, it should be powered on frequently for maintenance and debugging. Whether it is indoor or outdoor LED display, if it is not used for a long time, dead lights and blind spots are likely to appear when it is used again. Therefore, it is necessary to power on the screen frequently.

more articles:

The latest project, Saudi Arabia LED MESH FACADE

 
   

Technology | analysis of naked eye 3D display technology

At present, the naked eye 3D large screen market is hot, and 3D technology is also known as 3D di...

Do you like ?790 views

Read more

Sunrise’s p2.604 curved LED display lights up under the Eiffel Tower

Sunrise’s p2.604 curved LED display lights up under the Eiffel Tower     Sunri...

Do you like ?641 views

Read more

Sunrise LED Rocky Rental Series led display for concert

Concert activities are popular in the United States, and sunrise’s products have been wide...

Do you like ?1,049 views

Read more

Sunrise 264 square meters Galaxy 3115 series mesh led facade in Armenia

  Sunrise 264 square meters Galaxy 3115 series mesh led facade in Armenia     Sun...

Do you like ?923 views

Read more

Sunrise led presents awards to excellent salesmen!

Doris, as a new salesman, won three orders in two months. It’s great.   Jack, the bu...

Do you like ?754 views

Read more

Our new product, led grow light, PPE reaches 2.6umol/j

640w and 800W full spectrum led grow light   It can be folded for convenient transportatio...

Do you like ?715 views

Read more

The latest project, Saudi Arabia LED MESH FACADE

The latest project, Saudi Arabia LED MESH FACADE. Ultra-high brightness, ultra-light LED display ...

Do you like ?1,194 views

Read more
Technical Support: Magic Lamp